Lincolnshire
Dry ridge and dry verge systems in Boston
Ridge and verge tiles mechanically fixed, ending the mortar cycle that fen wind and frost keep restarting.
If there is one job that suits Boston roofs particularly well, it is this one. Mortar-bedded ridges and verges fail faster on exposed ground, and there is very little shelter anywhere between here and the coast. A dry system fixes the tiles down mechanically and takes mortar out of the equation for good.
The cycle worth breaking
Mortar is rigid, a roof moves, and the bed cracks because it cannot follow. Water gets into the crack, frost expands it, and pieces begin to let go. Then a gale off the wash finds whatever is loose. Rebedding restores the roof to exactly the state it was in before it failed, which is why so many houses here have had it done twice.
What gets fitted
A ridge kit runs a ventilated roll along the apex with each ridge tile screwed down to a batten through a clamp. A dry verge is a set of interlocking caps down the gable edge, again mechanically fixed. Both are ventilated, and ventilation matters more than people expect: a roof needs air moving through it, and a solid mortar bed is very effective at preventing that.
Gable ends take the worst of it
On an exposed fen gable the verge is the first thing the wind gets under. Once one verge tile lifts, the wind has an edge to work at and the rest follow along the run. A dry verge removes that edge entirely, which is worth more here than in a sheltered town.
On its own or with a re-roof
We fit dry ridge and verge as standard when we re-roof, as we did at Wyberton where the ridge and both hips were dry fixed. Where the covering is sound we fit it as a job in its own right, which is quick work with a permanent result. Photographed before and after, five or ten year guarantee, insured.
- Guaranteed for five or ten years
- Free quote, confirmed in writing
- No surprises on the bill: the quoted figure is final
- Public and employer's liability cover on every job
- Customers score us 5.0 wherever we are reviewed
Our work
Jobs near Boston
Every photograph here is EverCrest's own, taken on the job.
What people say
In their words, not ours
Brilliant work! Reasonable price a friendly. Recommend to anyone. Sorted out my roof after 3 companies turned me down.
Amazing roof repair everything finished to a high standard,good communication and reasonable priced would definetly recommend.
Great experience from start to finish. The team was professional, reliable, and completed the re-roof to a really high standard. Communication was clear throughout, and everything was left clean and tidy afterwards. Very happy with the result and would definitely recommend!
Before you ring
Dry Ridge & Dry Verge in Boston: common questions
My ridge was rebedded a few years ago and it has gone again. Why?
Because rebedding puts back the thing that failed. On exposed ground the crack, freeze and lift cycle simply starts over. A mechanically fixed ridge has nothing in it to crack or wash out.
Does it look different?
The ridge barely changes, because the same tiles sit in the same place. A dry verge alters the gable edge a little, and we will show you what it looks like before you commit to it.
Can it be fitted without re-roofing?
Yes, and often it should be. If the covering has years left in it there is no sense replacing it to fix the ridge.
Is it worth doing the verges as well as the ridge?
On an exposed gable, usually yes. The verge is where wind gets its first grip, and doing the ridge alone leaves the edge that fails first untouched.
Free written quotes · Five year guarantee · Fully insured
Get a straight answer on your roof
Give us a ring. If nobody picks up we are on a roof, so leave a message and you will get a call back.