Roofing
Mortar-free ridge and verge systems.
Traditional ridge and verge mortar has one flaw: it is mortar. It cracks with the roof's movement, dries out in the sun and washes out in the rain, and every few winters somebody has to go back up and do it again. A dry ridge or dry verge system replaces the mortar with mechanical fixings, screws, clamps and clips, so there is nothing up there to crack and wash out.
The ridge tiles along the top of the roof are fixed down mechanically to a continuous roll, which holds them fast in wind and lets the roof breathe. No mortar bed, so no mortar failure.
The verge is the roof edge above your gable wall. Dry verge units cap and clip each tile end, closing the edge against wind, rain and nesting birds without a bed of mortar to fall away on to the drive.
We use dry-fix systems as standard on our own full re-roofs, fixing ridge and hips mechanically rather than bedding them, and we retrofit the same approach to existing roofs whose mortar has had its day. Once fitted, the wind can pull at a mechanically fixed ridge all it likes.
Our work
Every photograph here is EverCrest's own, taken on the job.
What people say
Brilliant work! Reasonable price a friendly. Recommend to anyone. Sorted out my roof after 3 companies turned me down.
Amazing roof repair everything finished to a high standard,good communication and reasonable priced would definetly recommend.
Great experience from start to finish. The team was professional, reliable, and completed the re-roof to a really high standard. Communication was clear throughout, and everything was left clean and tidy afterwards. Very happy with the result and would definitely recommend!
Everything else we do
Storm damage and leaks made safe, day or night.
Call 01406 704369 → Don't get your roof done till we've seen it Roof InspectionsA full roof check before you buy or after a storm.
Book an inspection →
Slipped tiles, leaks and flashing put right.
Learn more →
Full re-roofs and new roofs, tiled and slate.
Learn more →
Garage and extension flat roofs.
Learn more →
Repointing, rebuilds and chimney removals.
Learn more →
Fascias, soffits and gutters replaced or cleared.
Learn more →
Moss stripped and roofs cleaned down.
Learn more →
Spray foam insulation stripped from roof timbers.
Learn more →
Failed or damp cavity insulation extracted.
Learn more →Where we work
These are the areas we cover. If yours is not listed and you are nearby, ring anyway, it is a short conversation.
Common questions
Ridge tiles come loose because the mortar bedding them has cracked and let go; mortar alone was never a permanent fixing. Since the 2014 revision of BS 5534, ridge and hip tiles have to be mechanically fixed as well, so the proper repair is a dry ridge system that clamps every tile to a batten. Repointing puts the same failure back for another few winters.
Read the full answer →Before you ring
It is a row of interlocking caps fixed along the edge of the roof above the gable wall, doing the job mortar used to do but held on with fixings instead. Nothing to crack, nothing to drop into the garden.
It varies with the length of ridge and hip and the access needed, so we look at the roof first, free, and then commit to a figure in writing. What we commit to is what you pay.
In most cases yes. Dry verge installation is a common retrofit on roofs whose edge mortar keeps failing. We will confirm it suits your tiles when we inspect.
Repointing buys time; a dry ridge removes the failure point altogether, because there is no mortar left to weather. We will tell you honestly whether your ridge needs either.
Yes, that is much of the point. The old bedding is replaced with mechanical fixings, so there is no loose mortar left to break away in frost or wind.
Dry Ridge & Dry Verge
Leave your name, a number or email and a line about the job, and we will get back to you.
Free written quotes · Five year guarantee · Fully insured
Give us a ring. If nobody picks up we are on a roof, so leave a message and you will get a call back.
